skip to Main Content

Pannier’s pneumatic stamping hammers are heavy duty marking systems for billets or other cast metals. Easily installed and operated, pneumatic hammers are built to withstand years of continuous use in mill environments.

Clear, legible marking on hot or cold metals.

Type cartridges hold up to three lines of characters for marking information such as heat, strand, and grade numbers in one stroke. A “floating” anvil inside the marking head allows the characters to align with uneven or skewed surfaces (up to 5°) to ensure legible marks. Operators can quickly change messages by switching quick-change type cartridges between production runs.

Stationary Marking

The Model 9200 hammer can be mounted horizontally or vertically on the production line. When the billet is in position, the marking cycle begins. The hammer’s air cylinder extends the marking head to make contact with the material, which actuates the stamping action.

Manual Marking

The Models F4 and D5 are lighter and suitable for mounting on a sling or a track with wheels. This makes it easy for an operator to mark several products in a short period of time.

Model 9200 pneumatic marking hammer
Model 9200 pneumatic marking hammer

Model 9200 pneumatic stamping hammer

Quick Change Pneumatic Hammer

Model 9200 hammer with quick change type holder

Model 9200 billet marking system with heat shield

Model 9200 billet marking system with heat shield

Model D5 pneumatic marking hammer

Model D5 pneumatic marking hammer

D5 quick change type holder

D5 quick change type holder

hot billet heat number stamping machine

D5 hammer marking hot steel billets

heat number stamping on hot and cold metal billets

heat number stamped on billet end

Model 9200 pneumatic marking hammerQuick Change Pneumatic HammerModel 9200 billet marking system with heat shieldModel D5 pneumatic marking hammerD5 quick change type holderhot billet heat number stamping machineheat number stamping on hot and cold metal billets
Specifications Model 9200 Model F4 Model D5
Stamping Force 135 ft/lbs 120 ft/lbs 60 ft/lbs
Anvil Size 2-1/2″ or 3-5/8″ 3-5/8″ 2-1/2″
Length, Retracted 36.5″ 48.6″ 44.9″
Length, Extended 50.5″ 49.1″ 45.6″
Mounting Options
  • Horizontal fixed mount
  • Vertical fixed mount
  • Hanging sling mount
  • Track mounted on wheels
  • Mounted on sliding table
  • Hanging sling mount
  • Track mounted on wheels
  • Mounted on sliding table
Weight 120 lbs 108 lbs 60 lbs

Talk to a product specialist about your marking project.

Ask Us a Question

Related Products

Supreme-Safe Type Holders

Supreme-Safe Type Holders

Heavy-duty type holders are a simple solution for hand-stamping heat, grade, or item codes on heavy steel products.

Printed Metal Tags

Printed Metal Tags

High temperature metal tags can be applied to metals as soon as they are cast.

Back To Top